ion ɗin baka na cathode na injincoAna rage girman ating a matsayin baka mai tsabtacoIdan aka yi amfani da tushen ƙafewar iska guda biyu ko fiye (wanda aka fi sani da tushen arc), ana kiransa da multi arc ioncoating ko MultiarkcoYin amfani da fasahar rufe ion na injin tsotsawa (vacuum arc) ce wadda ke amfani da fitar da iskar gas mai zafi don fitar da iskar gas. Ba kamar iskar gas mai zafi ta fitar da iskar gas mai zurfi ba, siffar arc ɗinta ita ce samuwar tabo na baka na cathode a saman cathode mai sanyi.
Halayen ion na arc cathode na injincowaɗannan sune:
(1) Tushen ƙafewar wani abu ne mai ƙarfi da ake kira cathode maƙasudi, wanda ke samar da jini kai tsaye daga tushen cathode ba tare da buƙatar tafki mai narkewa ba. Ana iya shirya tushen arc maƙasudi a kowace hanya da kuma hanyoyi da yawa don tabbatar da cewa an rufe shi daidai gwargwado.
(2) Tsarin kayan aiki yana da sauƙi, ba tare da buƙatar iskar gas mai aiki ko hanyoyin ionization na taimako ba. Tushen da aka yi niyya a baka ba wai kawai tushen ƙafewa bane ga kayan cathode, har ma tushen ion; A lokacin ajiyar mai amsawa, iskar gas mai amsawa kawai ke wanzuwa, kuma ana sarrafa yanayin ta amfani da madaidaicin sarrafa matsin lamba.
(3) Yawan ionization yana da yawa, gabaɗaya yana kaiwa kashi 60% ~ 80%, kuma ƙimar ajiya tana da yawa.
(4) Ƙarfin ion ɗin da ya faru yana da yawa, kuma ƙarfin haɗa fim/substrate na fim ɗin da aka ajiye yana da kyau.
(5) Amfani da wutar lantarki mai ƙarancin ƙarfin lantarki don aiki lafiya.
(6) Yana iya ajiye fina-finan ƙarfe, fina-finan ƙarfe, amsawa da haɗa fina-finan mahadi daban-daban (mahaɗan ammonia, carbide, oxides), har ma da haɗa fina-finan DLC, fina-finan CN, da sauransu. Rashin ingancinsa shine yayin da ake ajiyewa, ana fesa ƙananan ɗigon ruwa daga saman da aka nufa, waɗanda ke taruwa a cikin layin fim ɗin da aka rufe kuma suna ƙara ƙaiƙayin layin fim ɗin. A halin yanzu, an yi nazari kan hanyoyi da yawa masu tasiri don ragewa da kawar da waɗannan ƙananan ɗigon.
Injin baka na injincoAn yi amfani da fasahar ating sosai don shafa fenti mai kauri don kayan aiki da molds. Tsarin fim sun haɗa da TiN, ZrN, HfN, TiAIN, TiC, TiNC, CrN, Al2O3, DLC, da sauransu. Kayayyakin shafa sun haɗa da kayan aiki, molds, da sauransu. Dangane da kwaikwayon fenti na zinare da launuka, tsarin fim ya haɗa da TiN, ZrN, TiAIN, TiAINC, TC, TiNC, DLC, Ti-ON, TONC, ZrCN, Zr-ON, da sauransu. Tsarin fim mai launi ya haɗa da baki, baƙi, shunayya, launin ruwan kasa, shuɗi launin toka kore, da sauransu.
Ion mai yawan bakacoAting yana da aikace-aikace iri-iri da kuma amfani mai ƙarfi, musamman wajen shafa kayan ado da kuma fim mai ƙarfi waɗanda ke jure lalacewa a saman kayan aiki kamar kayan aikin yankewa, molds, da faranti na bakin ƙarfe.
Lokacin Saƙo: Agusta-17-2023