The vacuum coating machine improves the coating structure of the surface layer

In view of the problems existing in the current slab structure in the whole application process, the vacuum coater has improved the slab structure of the original general coating equipment for many times to form the following structure, as shown in Fig. 2 (a) and (b). According to the design scheme, the storage barrel can be stacked to reduce the total area of tissue diameter, but the total tissue diameter increases to about 20 pieces, and the diameter of all tissues decreases to 089mm. As a result, it can increase the total number of products carried on the surface coating board of small products, improve productivity, improve the supervision accuracy of plastic film, reduce the provisions of hardware system, and it is very easy to complete the automatic control system of the system.

According to the actual position, the improved rotating double medicine group 23 is fixed in the vacuum casting system according to the connecting plate and connecting block 21. The rotation of a piece of fitness movement, the movement type of rotating sealing shaft, the room of the driving wheel of the vacuum pump, and the transmission gears driving the rotation of the rotating shaft belong to 24 and Z to complete the rotation organization of all parts. When the relative slice is converted into oral epithelial cells, according to the rotation process of the dial 29, the relative slice falls into the relative slice storage barrel 219 and reaches the set part. At the same time, with the rotation of the process, the relative slice is transferred to the relative slice receiving barrel 212. Rotate one process at a time. Among them, the transmission mechanism composed of rotating shaft 24, transmission wheel, transmission gear and belt bearing rotates.

vacuum coating machine,evaporation coating machine