Mekhoa ea ts'ebetso le mekhoa ea ts'ebetso e amang boleng ba lisebelisoa tsa lifilimi tse tšesaane (Karolo ea 2)

3. Tšusumetso ea mocheso oa substrate

Mocheso oa substrate ke e 'ngoe ea maemo a bohlokoa bakeng sa kholo ea lera. E fana ka tlatsetso e eketsehileng ea matla ho li-athomo kapa limolek'hule tsa membrane, 'me e ama haholo sebopeho sa membrane, coefficient ea agglutination, coefficient ea katoloso le boima ba aggregation. Pontšo ea macroscopic ka har'a index ea refractive ea filimi, ho hasana, khatello ea maikutlo, ho khomarela, ho thatafala le ho insolubility ho tla fapana haholo ka lebaka la mocheso o fapaneng oa substrate.

(1) Cold substrate: hangata e sebelisoa bakeng sa mouoane oa filimi ea tšepe.

(2) Melemo ea mocheso o phahameng:

① Limolek'hule tse setseng tsa khase tse kentsoeng holim'a substrate lia tlosoa ho eketsa matla a tlamang pakeng tsa substrate le limolek'hule tse behiloeng;

(2) Khothalletsa phetoho ea adsorption ea 'mele ho chemisorption ea lera la filimi, ho ntlafatsa tšebelisano pakeng tsa limolek'hule, ho etsa hore filimi e be thata, e eketsa ho khomarela le ho ntlafatsa matla a mochine;

③ Fokotsa phapang lipakeng tsa mocheso oa limolek'hule tsa mouoane le mocheso oa substrate, ntlafatsa letsoalo la lera la filimi, eketsa boima ba lera la filimi ho felisa khatello ea maikutlo.

(3) Bothata ba mocheso o phahameng haholo: sebopeho sa lera la filimi se fetoha kapa thepa ea filimi e senyeha.

4. Liphello tsa ion bombardment

Bombardment ka mor'a plating: ntlafatsa aggregation segokanyipalo sa filimi, ntlafatsa karabelo ea lik'hemik'hale, eketsa refractive index ea filimi oxide, matla a mochine le ho hanyetsa le adhesion. Moeli oa tšenyo ea leseli oa eketseha.
5. Tšusumetso ea thepa ea substrate

(1) Coefficient e fapaneng ea katoloso ea thepa ea substrate e tla lebisa khatellong e fapaneng ea mocheso oa filimi;

(2) Likamano tse fapaneng tsa lik'hemik'hale li tla ama ho khomarela le ho tiea ha filimi;

(3) Bokhopo le mefokolo ea substrate ke mehloli e ka sehloohong ea ho hasana ha filimi e tšesaane.
6. Tšusumetso ea ho hloekisa substrate

Masala a litšila le detergent holim'a substrate a tla lebisa ho: (1) ho khomarela hampe filimi ho substrate; ② Ho monya ho hasana hoa eketseha, matla a anti-laser a fokola; ③ Ts'ebetso e mpe ea phetiso ea leseli.

Sebopeho sa lik'hemik'hale (mefuta ea ho hloeka le ho se hloeke), boemo ba 'mele (phofo kapa thibela), le pretreatment (vacuum sintering kapa forging) ea thepa ea filimi e tla ama sebopeho le ts'ebetso ea filimi.

8. Tšusumetso ea mokhoa oa ho fetoha mouoane

Matla a kinetic a pele a fanoang ke mekhoa e fapaneng ea mouoane ho etsa mouoane oa limolek'hule le liathomo a fapane haholo, a baka phapang e kholo sebopeho sa filimi, e bonts'ang e le phapang ea index ea refractive, ho hasanya le ho khomarela.

9. Tšusumetso ea ho etsahala ha mouoane Angle

The vapor incidence Angle e bua ka Angle pakeng tsa mouoane limolek'hule mahlaseli a tataiso le bokaholimo tloaelehileng ea substrate tlotsitsoeng, e amang litšobotsi kgolo le segokanyipalo segokanyipalo sa filimi, 'me o na le tšusumetso e khōlō ka index refractive le litšobotsi tse hasanya tsa filimi. E le hore u fumane lifilimi tsa boleng bo phahameng, hoa hlokahala ho laola Angle ea tlhahiso ea motho ea limolek'hule tsa mouoane oa thepa ea filimi, eo ka kakaretso e lokelang ho lekanyetsoa ho 30 °.

10. Liphello tsa phekolo ea ho baka

Phekolo ea mocheso ea filimi sepakapakeng e loketse ho lokolloa ha khatello ea kelello le ho falla ha mocheso oa limolek'hule tsa khase tse potolohileng le limolek'hule tsa filimi, 'me li ka etsa hore sebopeho sa filimi e kopane, kahoo e na le tšusumetso e kholo ho index ea refractive, khatello ea maikutlo le ho thatafala ha filimi.