Industry information

Home  > INFO CENTER  > Industry information  > 

Plating of Titanium Carbide Nitrogen (Rose Gold) for PVC Vacuum Coating Machine

Plating of Titanium Carbide Nitrogen (Rose Gold) for PVC Vacuum Coating Machine


Plating of Titanium Carbide Nitrogen (Rose Gold) for PVC Vacuum Coating Machine

TiCN——Titanium Carbide Nitrogen (Rose Gold)


(1) Film effect: The surface has high hardness, smooth surface, suitable for heavy cutting, and avoids the phenomenon of chip accumulation on the knife edge.


(2) Application fields: commonly used in high-speed steel milling cutters (especially wave blade cutters) wire tapping, hob processing, stainless steel, galvanized sheet and other viscous materials such as drawing molds.

PVD vacuum coating machine

The development and future trend of optical processing technology of vacuum coating machines. Cold processing of optical coating parts in China was very rare during the Republic of China. By the 1950s, optical processing technology was introduced from the Soviet Union and East German socialist countries, which was almost a copy Here.


Optical cold processing uses loose abrasives for rough grinding, fine grinding, and classical polishing. The processing efficiency is low, and the technical requirements for the operators are high. Each operator has to go through many years of technical post training before he can officially start working. Workers with better skills can complete the whole line of work alone, from processing rough to polishing. At this time, optical cold processing mainly relies on the skills and experience of skilled workers to process parts, and the role of process design is not very important in this period.


At that time, there was no strict process standard. Usually, only the process size, surface accuracy and appearance requirements are given in the processing requirements, and the processing adjustment parameters may not be clearly specified. The operator can adjust the processing according to each person's personal experience. Just produce parts that meet the requirements of the drawings. Usually every enterprise has a surplus of labor, and the focus on production efficiency is far less than the requirements for political ideas.


With the introduction of spherical milling machines and surface roughing machines, the labor intensity of roughing operators has been eased, and the processing efficiency of roughing has been greatly improved. Process requirements have also improved, but due to the lower accuracy of the equipment, there is no change in the requirements of the subsequent processes, and the role of process standards has not changed significantly. After that, high-speed polishing of the quasi-sphere center appeared, the production efficiency of optical cold processing was rapidly improved, the division of labor was clearer, and the role of process standards was significantly improved. The role of the craftsperson plays a decisive role in the production process. Standardization of operations has become the main content of the company's daily work. The "craftsmanship" of the old workers has changed from a dominant role in the past to an auxiliary role. Slogans such as "operating according to standard", "operating according to standard" and "production according to standard" have become the foundation of every modern enterprise's production. The process method, process route and process standard formulated by the technologist play a decisive role in the production of the enterprise.

Chat Online 编辑模式下无法使用
Chat Online inputting...