Industry information

Home  > INFO CENTER  > Industry information  > 

One of the benefits of vacuum coating machine

One of the benefits of vacuum coating machine

2020-09-20

One of the benefits of vacuum coating machine

PVD vacuum coating machine


With the progress of social economy and science and technology, people's requirements for the quality of life have been gradually improved. At the same time, people's awareness of environmental protection has become stronger and stronger. So in recent years, the products processed by vacuum coating technology are more and more extensive and life-style. At the same time, many countries have also issued relevant policies, stipulating that electroplating technology that pollutes the environment is not allowed to be used. Since 1992, Guangdong Zhenhua Technology Co., Ltd. has been focusing on the research and development of vacuum coating technology and the research and manufacture of vacuum coating machine. It strongly advocates that the products requiring surface treatment are processed by vacuum coating machine, which can not only make the products get better appearance but also protect the environment. 






The parameter setting of the vacuum coating machine is mainly carried out on the operation panel, and the corresponding adjustment is made as the vacuum value of the vacuum chamber increases before the winding work starts.


In the main operation screen:


  "Evaporation shutdown voltage" setting key, used to set the percentage of the voltage of the evaporation boat when the winding stops, unit: %;


  "Evaporation boat voltage display", it displays the percentage of the current working voltage of the evaporation boat, unit: %;


  "Wire feeding speed display", used to display the wire feeding speed, unit:%


   (Note: The value will be automatically cleared to zero after each stop of wire feeding).


  Length meter, display the current winding length of the material, unit: m;


  "Clear" key is used to clear the display value of length;


"Initial measurement error" is when the value of "Unwinding initial diameter input" does not match the current actual unwinding diameter, and the error exceeds "Unwinding initial diameter error value positive setting" and "Unwinding initial diameter error value negative When the preset range is set between ", after the winding system starts running, this icon will flash to indicate an alarm and stop automatically. At this time, the actual roll diameter of unwinding should be re-measured and input again. Then restart the operation.


   When the "Broken Film Detection" key is enabled, it displays the current winding status of the winding system. When a film break occurs, this icon will flash to indicate an alarm, and the words "Normal" and "Broken Film" will be displayed at the same time.


Chat Online 编辑模式下无法使用
Chat Online inputting...