jiangxi chenming drives chinese lwc market.

by:ZHENHUA     2020-03-30
Jiangxi Chenming Paper Co. , Ltd.
The real green Mill. -
Or more accurately, it\'s a red clay Mill.
The mill was built on a tree-free, barren land.
From the center of Nanchang, China, on the hillside of several kilometers in Nanchang Economic and Technological Development Zone.
It has a brand new Metso OptiConcept paper machine with a capacity of 350,000 metric tons/year and a capacity of 48-
70 gsm light coating (LWC)paper. The mill--
The cooperative relationship between Chen Ming paper
Sappi, Shinmoorim and investment company--
This is a good example of the common joint ventures in China\'s paper industry that introduce foreign capital while maintaining Chinese control.
It is important that the factory is located in Nanchang, a relatively underdeveloped city in southwest Shanghai.
China\'s ability to develop inland areas such as Nanchang (
Provincial capital of Jiangxi province)
Crucial to China\'s rapid economic expansion-
Now mainly concentrated in coastal areas. -
To other parts of China.
Therefore, the Chinese government encourages enterprises to increase their investment in the Chinese mainland. the Chenming Mill in Jiangxi province is a good example.
The workers in the factory are very good.
Educated but inexperienced
350 from the nearest paper mill;
Chen Ming is selling LWC to the Chinese market, and the Chinese market is not fully familiar with the grade of LWC.
The Chenming Mill in Jiangxi province, built in about 18 months, is still in progress.
The construction of the plant began in September 2003 and the paper machine began production of uncoated paper in March 2005.
On May 18, 2005, the production of LWC began in Chenming, Jiangxi province. [
Slightly] Illustrations
There are signs of recent and ongoing construction everywhere.
The pulp mill runs only half the time because it has enough capacity to provide two paper machines.
The factory does not intend to install the pulp dryer and transport the market pulp, so the logical conclusion is that the paper machine will be added in the future.
In September, the factory had three months of wet and Masson pine on hand, and three months of recycled fiber, much more than it needed.
A large amount of pulp wood is carefully stacked-by hand.
The factory continues to develop new and inexperienced staff.
Jiangxi Chenming supplies most of its electricity through coal
Next to woodyard there is a huge roof coal storage area and a coal-fired boiler.
Still, it needs to buy electricity to meet the balance of its energy needs.
Chris Matthews, chief financial officer of Chenming, Jiangxi, explained that the factory\'s total market value was about $0. 437 billion.
The LWC of the factory is sold by three investors of the factory: Chenming Paper Co. , Ltd. (China)
Owns a 51% stake in the Sappi factory (South Africa)
34% and Shinmoorim (Korea)7. 5%.
Seven left.
5% is owned by the investment company IFC.
DoNews from Sappi reports that most of the paper is sold domestically, in part because the paper currently exported from China is very expensive.
Congestion at the port is \"huge\" and freight charges are soaring, he said.
Although the target of the factory is to produce about 29,000 tons/day with an efficiency of 92%, on September, Jiangxi Chenming was still in the starting range of 20,000 tons-23,000 tons/year.
Hotel Andritz bleach spa
Mechanical pulp (BTMP)
The mill has an annual output of 187,000 metric tons of pulp and uses 136,000 metric tons/year of deinked pulp (DIP).
According to DoNews, most of the LWC factories currently sell in the Chinese market, but Chenming, Jiangxi, has a big export plan.
\"We will expand production in the Chinese market and develop the export market, and we hope to finally export about 60% of the products,\" he said . \".
\"We have seen export sales in the west coast of the United States, Australia, Venezuela, Argentina and South Korea, Japan and other Asian markets.
Matthews said: \"Jiangxi Chenming is also introducing the LWC level to China.
\"LWC is a new market in China, so it\'s hard to say what the exact size of the market is.
It is estimated to range from 350,000 tons to 700,000 tons per year, but it is still growing. \" [
Slightly] Illustrations
According to Matthews, the plant is still working to improve the quality of paper.
\"We have not yet reached the level of quality we want, but we have reached an acceptable level,\" he said . \".
Customers in China\'s domestic market tend to demand higher brightness LWC paper, while international markets want lower brightness and higher opacity, DoNews said.
Chenming Paper Co. , Ltd.
Have another LWC machine in another factory, which takes 81-
83 ISO brightness, and the international market often requires 78-
He pointed out that the brightness is 79 degrees. [
Slightly] Illustrations
As of September, the raw material challenges faced by Chenming in Jiangxi province were mainly focused on several raw material issues.
First of all, the BTMP fiber production line runs only half the time, so it is a challenge to make high-quality pulp.
In addition, the 8 th and 10 th DIP imported from the United States is of poor quality, about 20-30% rejects.
Although Matthews pointed out that the quality has improved, its pulp quality is very poor at the start-up.
\"We are working on quality standards,\" he said . \".
\"A lot of the wood is not mature yet, the weather conditions produce a lot of fungi on the wood, but the situation is improving,\" he said . \".
The wood was originally from 300 km metres away, but today it is mainly from tree plantations, closer to the mill.
According to DoNews, cost is also a problem, although the factory does enjoy a huge cost advantage in several areas.
\"The cost of raw materials in China is not as low as some people think, but at least not higher than the rest of the world.
Tariffs on many imported raw materials are high, which can push up your costs.
Overall, the price of raw materials is not much different from the rest of the world. \" [
Slightly] Illustrations
Matthews pointed out that it is very expensive to buy electricity in China (
Cheaper than Western countries though)
That\'s why the factory is two-
People in their thirties are self-sufficient in energy.
Through two pieces of coal
After the boiler is burned, the factory generates 100,000 KW of the power and uses 140,000 KW of the full load.
Matthews said that in China, the fixed cost of operating the factory is much lower, which provides an important advantage ---
If the newspapers stay in China
\"At present, the export freight is very expensive, but the domestic freight in China is not expensive,\" he said . \".
While the factory introduced experts from other paper mills in Chenming to start and run the factory, Chenming, Jiangxi province is still training inexperienced employees.
The factory spends one hour a day training employees in all areas of the factory and work categories.
At present, about 1200 workers are employed in the factory. shift system.
Among them, about 780 workers live at the site of the company\'s dormitory.
The maintenance department is a good example of the level of factory experience;
Of the 75 persons repaired, only 12 had more than one year of experience.
However, there are four universities in the area, and the level of education for new workers is high, and they are well adapted to a wide range of training programs.
Matthews said that Chenming, Jiangxi province, was the first investment in China by Sumu, a successful investment by Sumu.
\"Yes, it\'s a brand new greenfield site, but we have an advantage in terms of cost and have good incentives to help us grow.
\"With the growth of Chinese market demand and relatively new grades ---LWC--
He concluded that the future looks bright on the way up.
Editorial director Alan Rukes, what will you learn: * why Jiangxi Chenming has built a new coated paper factory in China\'s relatively underdeveloped areas.
* How does the factory expand the Chinese market of LWC, which is a rank unfamiliar to China.
* How the factory responds to raw materials and training challenges.
Add to Alan Rooks\'s solution: * \"China: Beyond Prosperity \"!
September 2005.
To access this article, type the following product code in the search field on www. tappi. org: 05SEPSO25.
Or call 1 800 332 to call TAPPI members-8686 (US); 1 800 446-9431 (Canada);
770 cm 446 cm 1400 cm month (International).
* The future of China: two new application factories, solution! , April 2005.
Product Code: 05APRS021.
* Hannu onenong and Xiao Xiaorong\'s \"Zhongzhu group and Yueyang group: Architecture for the future\", solution! , July 2004.
Product Number: 04JULS039.
Related articles: Jiangxi Chenming Paper fiber line and BTMP fiber line of Jiangxi Chenming Paper Co. , Ltd. Ltd.
Provided by Andritz.
The factory uses peroxide bleaching.
Metso Paper provides methods and inventory preparation systems including pulp and wet-end chemical systems.
Metso Paper LWC paper making line includes: * Paper Machine * coating and coating color system * calender * Reeling wire * winding * Roll handling paper machine design productivity of 340,000 metric tons/year;
The design speed is 2000 m/min;
The width of the wire is 8600mm, and the maximum decoration is 7800mm;
LWC base weight range is 45-70 gsm.
One of the main grades produced by the factory is 45 gsm raw paper, 13 gsm coating (6. 5 gsm per side).
Grinding calcium carbonate is used in the Mill (GCC)as filler.
Produced by an independent live producer led by Omya.
Other details include: * Metso Automation provides MCS, QCS and PCS systems to the factory.
* Pumping water from the barge on the Ganjiang River.
The factory pays a fixed fee for water.
* The plant operates two coal-fired boilers and two turbines.
It is considering installing a third boiler and generator to burn bark and grind waste, which will make the mill 100% self-sufficient.
* The factory has obtained permission to install railway connections to transport wood and coal;
At present, all raw materials are arrived by truck.
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Chat Online inputting...