- Vacuum Evaporation Coating Machine
- Optical Coating Machine
- Magnetron Sputtering Coating Machine
- Roll To Roll Coating Machine
- Inline Sputtering System
- Other Machine
how spray paint works
Fast application, even coating, almost no waste-
Enlarged in a big-
Soon after Seymour put forward his ideas to the public, the factory and the manufacturing plant began to notice this.
Powder spraying, vacuum spraying and flat wire spraying are the three most common methods in industrial spraying.
Powder Coating, sometimes called electrostatic painting, is a way to apply dry paint on the surface. Like the paint-
The propellant mixture inside the spray tank, compressed air is used to drive the spray particles of the paint to the target through the spray gun.
These particles are very fine, like dust or powder.
Just like the aerosol tank, the particles get the charge from the friction generated when passing through the nozzle.
Because the particles with positive electrons are mutually exclusive, they are evenly distributed together before contacting the drawn object.
Since the object is always charged in reverse, the paint is usually attached to the surface by grounding the cable connected to any metal part of the Assembly.
The company turns to vacuum coating to apply water
Drawing based on objects (
Usually parts made of sheets such as wood, glass or plastic)
A very thin coat is needed.
In this method, the painted object is placed in a chamber or paint gallery where its entire surface area is submerged in a paint solution or sprayed with a nozzle.
Paint is evenly applied around the object in the same volume, so the whole object is covered.
Finally, the object is removed from the chamber and exposed to extremely high levels of UV light.
This photoization process, known as UV curing, uses light instead of heat and is able to dry objects in seconds.
Finally, flat line spraying is one of the most popular methods of painting materials made in large quantities.
Object, usually less than 4 inch (
About 10 centimeters)
On the assembly line, thick is fed into a machine specially designed for the part.
Apply paint by programming a spray gun that completes a series of actions to ensure that the entire part is covered.
But the painting is not all home decoration and manufacturing.
Keep reading and learn how painting makes women and rotten buildings more attractive.