Industry information

Home  > INFO CENTER  > Industry information  > 

A multifunctional integrated PVD vacuum coating machine, including a PVD vacuum coating machine body

A multifunctional integrated PVD vacuum coating machine, including a PVD vacuum coating machine body

2021-02-28

A multifunctional integrated vacuum coating machine, including a PVD vacuum coating machine body


1. A multifunctional integrated PVD vacuum coating machine, comprising a vacuum coating machine body (7), characterized in that: a heat dissipation shell (2) is provided on the outside of the vacuum coating machine body (7), and the heat dissipation shell A supplementary air box (4) is fixedly installed on one side of (2), and a supplementary air dust collector (3) and a supplementary air pump (5) are respectively arranged inside the supplementary air box (4), and the supplementary air dust collector ( 3) In communication with the supplemental air pump (5), the top of the supplemental air pump (5) is fixedly connected with a trachea (6) that penetrates the supplemental air box (4) and the heat dissipation housing (2), and the heat dissipation housing (2) A vent pipe (9) is fixedly connected to the other side of the vent pipe (9), a water tank (8) is arranged between the vent pipe (9) and the heat dissipation housing (2), and the inside of the vent pipe (9) is respectively provided with heat dissipation The fan (10), the card slot (14) and the sponge metal mesh (11), the outside of the ventilation pipe (9) is provided with a gap (12) matching the sponge metal mesh (11), and the sponge metal mesh ( 11) It is connected to the water tank (8), a fixed block (28) is fixedly installed on one side of the sponge metal mesh (11), and an installation groove (18) is opened on the upper surface of the fixed block (28), and the installation A limit ring (16) and a spring (17) are arranged inside the groove (18), the limit ring (16) is located directly above the spring (17), and the limit ring (16) and the spring (17) A movable rod (15) penetrating through the fixed block (28) is jointly arranged on the inner side of the movable rod (15), and the movable rod (15) corresponds to the card slot (14).


2. A multifunctional integrated vacuum coating machine according to claim 1, characterized in that: the lower end of the movable rod (15) is fixedly connected with a pull ring (13), and the outer side of the pull ring (13) The sleeve has a rubber sleeve.


3. A multifunctional integrated vacuum coating machine according to claim 1, characterized in that: the bottom of the heat dissipation shell (2) is fixedly installed with a base (1), and the bottom surface of the base (1) Four grooves (21) are evenly opened, each of the grooves (21) is provided with a limiting groove (24) on the inner side, and the upper surface of the inner cavity of the groove (21) is rotatably connected with a threaded post ( 26), the outer side of the threaded column (26) is screwed with a threaded tube (22), and the outer side of the threaded tube (22) is fixedly installed with a limiting block (25) matching the limiting groove (24).


4. A multi-functional integrated vacuum coating machine according to claim 3, characterized in that: the lower end of the threaded tube (22) is fixedly installed with a foot support (23), and the lower part of the foot support (23) Non-slip mats are fixedly installed on the surface.


5. A multifunctional integrated vacuum coating machine according to claim 3, characterized in that: the outer side of the threaded column (26) is respectively sleeved with a gear (19) and a gear ring (27), and the tooth The ring (27) is meshed with the gear (19), and an operating rod (20) is fixedly installed on the outer side of the gear ring (27).


6. A multifunctional integrated vacuum coating machine according to claim 5, characterized in that: the tooth pitch of the gear (19) is 0.2mm, and the gear (19) and the threaded column (26) Between them is fixed by welding.



Chat Online 编辑模式下无法使用
Chat Online inputting...